Diligent Defense Enticer S
In stock
Only %1 left
SKU
DD-ES
Our Price:
$450.00
DILIGENT DEFENSE ENTICER S
The Enticer S from Diligent Defense is a stainless version with the same form factor as the S-Ti. The Enticer S measures 6.75 inches long, putting it on par with most mid-sized suppressors on the market. When compared to cans with a similar footprint, the Enticer S has more internal volume. It's not magic as you may expect, but a tubeless design that maximizes internal volume without adding unnecessary size and weight.
A combination of the increased volume with patent-pending baffle geometry makes the Enticer S remarkably quiet for it's size. It can outperform many competing cans that are longer and heavier. The DDC Enticer S is made from steel, giving it quite a bit more strength than it's titanium brethren. The strength increase comes at a cost, however, it's only 3 ounces. The stainless suppressor shows lower numbers on the scale than many full Ti suppressors currently available.
Like their other suppressors, the Diligent Defense Enticer S uses the 1-3/8" mounting thread pitch. This industry standard, also known as Bravo or HUB, allows for a huge amount of 3rd party accessories to be used. The Enticer S ships in a 5/8x24 direct thread configuration but can be configured quickly for other thread pitches or mounts. SilencerCo's ASR, Plan B by Q, Griffin's Plan A, and Dead Air's Keymo system are just a few that can be installed. If mount compatibility wasn't enough, DDC's suppressors are also compatible with Dead Air Armament's front caps!
FEATURES
- Rated for 300RUM and under
- Semi-auto rated
- Raw finish
- Bravo/HUB mounting system
- Compatible with Dead Air front caps
WHAT'S INCLUDED
- Silencer
- Sticker
- 5/8x24 direct thread mount
- No BS warranty
COMPATIBLE ACCESSORIES
- Direct Thread Mounts - Dead Air, SilencerCo, Energetic Armament, YHM
- SilencerCo Bravo ASR
- Plan-B by Q (Bravo / Omega)
- Dead Air Key-mo (Bravo / Omega), Xeno
- EA TBAC Adapter
- Griffin A2 Adapter, Plan A, Dual-Lok
- YHM Kurz QD Adapter, Phantom QD Adapter
BARREL RESTRICTIONS
- 10" - 5.56
- 14.5" - .308
- 7" - 300 BLK (super)
- 5" - 300 BLK (sub)
- 20" - 300WM
- 24" - 300RUM
Write Your Own Review
| Price | $495.00 |
|---|---|
| Caliber | .224, 7.62x39, FN 5.7x28, .223, 5.56mm, 300BLK, .308, 7.62mm, .300 Win Mag, 6.8 SPC, 6.5 |
| Weight | 13.800000 |
| Length | 6.75 |
| Diameter | 1.625" |
| Decibel Reduction / Output | Not Provided |
| Full Auto Rated | No |
| Mount | 1.375x24 - HUB/Bravo |
| Thread Pitch | 5/8x24 |
| Materials | 100% CNC machined 17-4 Stainless laser welded & heat treated |
| Can Be Disassembled | No |
| Manufacturer | Diligent Defense |
| Warranty | Lifetime |
| Minimum Advertised Price | 515.00 |
| Apply Partial Payment | No |
| Allow Flexy / Layaway Payments? | No |
| Allow Full Payment? | No |
| Down Payment | 0.000000 |
DILIGENT DEFENSE ENTICER S
The Enticer S from Diligent Defense is a stainless version with the same form factor as the S-Ti. The Enticer S measures 6.75 inches long, putting it on par with most mid-sized suppressors on the market. When compared to cans with a similar footprint, the Enticer S has more internal volume. It's not magic as you may expect, but a tubeless design that maximizes internal volume without adding unnecessary size and weight.
A combination of the increased volume with patent-pending baffle geometry makes the Enticer S remarkably quiet for it's size. It can outperform many competing cans that are longer and heavier. The DDC Enticer S is made from steel, giving it quite a bit more strength than it's titanium brethren. The strength increase comes at a cost, however, it's only 3 ounces. The stainless suppressor shows lower numbers on the scale than many full Ti suppressors currently available.
Like their other suppressors, the Diligent Defense Enticer S uses the 1-3/8" mounting thread pitch. This industry standard, also known as Bravo or HUB, allows for a huge amount of 3rd party accessories to be used. The Enticer S ships in a 5/8x24 direct thread configuration but can be configured quickly for other thread pitches or mounts. SilencerCo's ASR, Plan B by Q, Griffin's Plan A, and Dead Air's Keymo system are just a few that can be installed. If mount compatibility wasn't enough, DDC's suppressors are also compatible with Dead Air Armament's front caps!
FEATURES
- Rated for 300RUM and under
- Semi-auto rated
- Raw finish
- Bravo/HUB mounting system
- Compatible with Dead Air front caps
WHAT'S INCLUDED
- Silencer
- Sticker
- 5/8x24 direct thread mount
- No BS warranty
COMPATIBLE ACCESSORIES
- Direct Thread Mounts - Dead Air, SilencerCo, Energetic Armament, YHM
- SilencerCo Bravo ASR
- Plan-B by Q (Bravo / Omega)
- Dead Air Key-mo (Bravo / Omega), Xeno
- EA TBAC Adapter
- Griffin A2 Adapter, Plan A, Dual-Lok
- YHM Kurz QD Adapter, Phantom QD Adapter
BARREL RESTRICTIONS
- 10" - 5.56
- 14.5" - .308
- 7" - 300 BLK (super)
- 5" - 300 BLK (sub)
- 20" - 300WM
- 24" - 300RUM